Own consumpion

Follow

sunnymorgan

• February 21, 2022 19:04

How do I set a design to use 100% own consumption and/or zero export to grid. (newbie)

0

• 

  OpenSolar Support

  • March 15, 2022 00:42

  Hi Sunny thanks for reaching out! You can do this by going to Design > Summary > Advanced Settings and then set the export limit to 0. Hope this helps. 

  0

  Comment actions Permalink
• 

  Steve Ragsdale

  • July 31, 2022 21:37

  I tried this tactic and the online proposal section of "How Your System Works" still shows the Excess Solar Generation going to the grid, which confuses the customer.  The system designed is an Uninterrupted Power Supply that is used for self consumption and UPS, but not able to feed or back-feed the grid. The grid is allowed to supplement the solar output to the home as needed.  Solar first then the grid.

  1

  Comment actions Permalink
• 

  Souleymane Thera

  • August 25, 2023 22:10

  Hello OpenSolar,

  Will it be possible to update How Your System Works to not show excess power generated flowing to the grid, as the OP mentioned?

  Thanks,

  0

  Comment actions Permalink

Please sign in to leave a comment.